Cracks
and cavities in structures are a generally
present problem in construction engineering.
Faulty-parts of this type can impair the stability
as well as utilization of the building and
can clearly shorten the „ life-expectation
„ of a structure.
The injection-systems of IPA offer proven
and innovative solutions.
For more than thirty years IPA was engaged
in the development and improvement of injection-systems.
Competent advice and practical experience
gives you security in application of IPA injectionsystems.
The investigation of the cause for damage
is normally the beginning of the designing
of sealing works or repairs.
Only if the causes for damage are known, the
selection of the matching injectionsystem
can be decided effectively.
Epoxy-systems are selected when high strength
is the objective. Coupling injections of structural
parts with inferior strength are more and
more carried out with mineral injectionsystems,
which can be adjusted by the selection of
the cementing agents, aggregates and additives
according to the requirements.
A sealing injection of defective parts, which
are continuously under movement (e.g. highway
bridges), takes place with PU-resins, which
harden to a permanently elastic end product.
The various solution-possibilities are described
in the following with the IPA injection-systems.
These are completed by the broad service-performances
of IPA technicians during damageinvestigation,
planning of repair works and their execution.
| IPA
Injection Technic Systems and Solutions |
| Sealing |
Cementitious |
| Waterstopping |
Flexible |
Coupling |
Coupling |
|
|
|
IPANOL IH |
IPA Injection Mortar
W |
| |
IPAPUR IF/Z |
|
IPA Injection Mortar
THS |
| IPAPUR
VM/Z |
|
IPAPOX IH/L |
IPA Injection Slurry |
| |
|
|
IPA PM Powder |
|
